Showing posts with label actuator. Show all posts
Showing posts with label actuator. Show all posts

Friday, April 20, 2012

DZ + Android + Arduino

DZ + Android + ADK
DZ core has been ported to work on Android OS using ADK devices as actuators.

Supported Android hardware:

  • Galaxy Nexus (unlocked) running ICS 4.0.4 (verified);
  • Nexus S running ICS 4.0.4 (verified);
  • Any phone or tablet running Android 2.3.3 or higher that supports ADK.
Supported ADK hardware:

What's in it for me?

  • No more messy software installation - DZ will install from Android Market.
  • No more messy hardware installation - all necessary peripherals are reduced to the Arduino board with the connector shield on it.
  • No more messy configuration.
  • There's a good chance that soon you will be able to - gasp - just buy it, nail it to the wall and it will "just work".

What's in it for me if I don't have or don't want a tablet/phone?

Arduino can still be used as a single peripheral device for all DZ needs.

Can I get it now?

Yes and no.

  • Arduino firmware is available from the source repository.
  • Android application will be soon published to Android Market.

Stay tuned.

When I can get it, what do I get?

In default configuration,
  • 6 analog temperature sensors
  • 6 servos
  • 2 4-way HVAC control blocks
Currently, 1-Wire and XBee drivers for DZ are in development. After they're done,
  • As many sensors as 1-Wire bus supports;
  • As many sensors as XBee network supports;
  • Up to 48 servos;
  • As many HVAC control blocks as XBee network supports.

Is it compatible with current DZ installation?

Yes, all aspects. The same Android application will be used to control all flavors of DZ.

Tuesday, September 13, 2011

Early Access: SwitchDamper

For years, DZ was able to control modulating dampers.


It seems, however, that bang-bang dampers still have their place, hence, SwitchDamper was added to Subversion and will become a part of the next release.

Now you can use DZ to control any HVAC actuator that is controlled by a switch. This includes, in particular, but not limited to:
  • existing open/close dampers normally controlled by 24VAC;
  • electric heaters that are configured as auxiliary heaters in a complex zoned system;
  • hydronic, geothermal and steam system valves.