Showing posts with label ethics. Show all posts
Showing posts with label ethics. Show all posts

Sunday, October 14, 2007

The Great Wiring Project, part 1

The Great Wiring Project, part 2
The Great Wiring Project, part 3



Initially, it was just about tidying up power cables, interconnections and speaker wires for the home theater. For about 30 seconds. Then I realized that the cable path is right next to air supply vents, and the rest was pretty simple. In theory.

It is often said that wiring is difficult. Not really - but it is sure different from most of the jobs people do for living, so you have to acquire some experience before it becomes easy. "How to do wiring" is a topic beaten to death elsewhere, so I'll try to concentrate on things I have not seen mentioned during all those years I've been planning to do the wiring.

Now it is a good time to recall the saying "Good judgment comes from experience. Experience comes from bad judgment". Not that I've had a lot of bad judgment calls, but some of them were pretty close - and I hope you folks do learn on my mistakes .

The first observation is - forget all hopes to make it all elegant. You can only make things elegant with some planning and forethought, and when you start your own wiring (or any kind of remodeling that makes framing and existing wires exposed in any way) - you will promptly realize that forethought and planning is not something present in buildings mass produced to satisfy skyrocketing minute-driven demand for new housing when the interest rate plummets.

Second observation is - forget the code. You will not see the code followed anywhere where the building inspector could not peek into when the building is finished. Not that you won't be brought to responsibility when something bad happens to the stuff you built, so be thoroughly prepared to present evidence that you did it all by code - there are two standards, for "them" and for "you".

The Great Wiring Project, part 2
The Great Wiring Project, part 3

Thursday, October 4, 2007

The joys of DIY

I seem to be having extremely bad luck with contractors. It can easily be that I'm in a severe violation of the "secret of life is: have low expectations" principle. Most probable explanation, though, is that they just want to get their work day over with and go home. I guess they hope nobody would notice.

So my car breaks down (they do that). I get it to the dealership, they fix it... and put a dent in the door. I politely point out that the door needs to be fixed, they politely agree, fix the dent... and break the center console. And blame it on the car wash guys (never mind that I have specifically asked not to wash the car - last time they did, it cost them (not me - it was still under warranty) $1572 and spare change to fix the headlights the "car wash guys" killed).

It is plausible to assume that whoever dented the door hoped nobody would notice. It is also plausible to assume that whoever broke the console hoped nobody would notice. They just didn't expect that to happen twice to the same person in a row.

Fine... When in two weeks my window regulator breaks down and the window gets stuck halfway down, I take my sweet time to fix it, and my sweet money to buy the tools necessary (never before in my life I had a need for a torx bit set and a torque wrench - have them now). Spent a week, but next time it'll be an hour - procedures learned, tools acquired.

Oh, and I've also fixed all the things that the guys at the dealership broke the first time the window regulator broke, a couple of years ago. Half of pistons holding the door panel were broken. The door was rattling all this time, I've never had time to address the problem in depth, told dealership, they said "they all do that with age". Right. Few pistons fifty cents each - I bet they have buckets of those at each corner of the shop in abundance. But no, they didn't care to replace the ones they broke. A guy I met today explained to me: auto mechanics get paid by the job, not by the hour. They'd rather get paid for two jobs - and then two again, next time when the complaint is handled.

So, I've eventually gotten myself to route the wires through the walls. So I cut the walls open, and what do I see? Correct, 120V NM cable bundled together with telephone cable and stapled to the studs with metal staples. Forget the building codes, who is going to rip the drywall open to check it? Next thing I see is a 120V NM cable suspended across 20ft gap... with plastic conduit tube simply hanging on it. Not connected to anything. Next thing I see is a web of telephone wires, just knotted together and suspended in the middle of the attic.

I'm not even talking about a 1 ft diameter flex tubing branch crammed in snaking between framing members so its length is almost twice the distance it has to cover, and eventually feeding a 6x6 inch register.

I guess they hoped nobody would notice.

So what recourse do I have? None, really. Except you do have to take your time and energy to study all the sources on the subject matter and know what you're talking about when you're talking to contractors (but then they get pissed at you and might eventually tell you "you're too #%So what recurse do I have? None, really. Except you do have to take your time and energy to study all the sources on the subject matter and know what you're talking about when you're talking to contractors (but then they get pissed at you and might eventually tell you "you're too #%$&ng smart, I'm not gonna do business with you"), or simply learn to do it yourself.
amp;ng smart, I'm not gonna do business with you"), or simply learn to do it yourself.

Yes, the price I've paid for the tools to fix that car window would've paid for the labor. ONCE. Yes, I've already invested over three hundred dollars in tools necessary to do wiring (quality fish tape, drill bits, drill with enough torque to handle inch and a quarter holes, cables, connectors, wall plates, and so on and so forth), but I'm perfectly sure that at the end of the day, I'll be proud of the work I've done, and will have learned something to top it up.

Not all DIY is about saving a buck. Sometimes, it's about the long standing quality and the satisfaction of a job well done.

Monday, August 6, 2007

Doctor, it hurts when I walk this way, or HVAC Checklist

Free Idiot Test - $5
Patient: Doctor, it hurts when I walk this way...
Doctor: Don't walk this way, then...

Buying a house is a major pain.

What I was talking about, again? Ah, the usual complaints people have about the house they just bought.

  • A particular register is too noisy.
  • Return air grill is too noisy.
  • Air handler is too noisy.
  • Condenser is too noisy.
  • A particular room is too cold or too hot.
  • One floor is hotter than the other.
  • A room feels stuffy when the doors are closed.
  • A/C can't keep up with the heat.
  • Heater can't keep up with the cold.
  • Air in the house feels musty.
  • There are dust traces outside of registers.
  • Bathroom walls stay moist forever.
The list becomes pretty long pretty fast, but it can grow significantly longer.

For one single reason: people don't pay attention to HVAC. They think about anything and everything except HVAC. And realize they're in trouble just as the train has just departed.

So, how this can be fixed? And who is in a position to fix it? Unsurprisingly, people who can benefit from this, at the same time helping potential victims avoid being trapped - realtors and, to less extent, HVAC servicemen.

It's a double edged sword, though - for realtors, HVAC is just one more hoop to jump through. For both the buyer's and seller's agents, this is an obstacle on the road between today and the moment they cash the commission check. It would take a person of high integrity to step away from otherwise inevitable financial gain - but wait, we're getting into old good argument about reputation...

Theoretically, it should be a part of home inspection report, but I'm yet to see one that would address those particular issues, or even if it did - somehow a $20 register doesn't seem to register, no pun intended, when a typical house could very well cost north of half a million dollars and this is exactly how much is at stake when you are considering buying it (or so you think at the moment. Actually, the stakes are even higher - your well being is at stake). Especially keeping in mind the fact that issues like this will surface well into the process, after you have already decided to make an offer, paid inspection fees and generally are tied up pretty fast.

Another issue is that a person or a crew that will perform the inspection is not necessarily highly proficient in HVAC. Yes, they know the motions (check the supply air temperature, etc.) - but what they do may not be enough. Then again, it is applicable to every possible subsystem in the house (Gawd! Don't ask me about the state the wiring system was in at the house I live in...) So the advice here would be to actually make an extra step and pay a HVAC contractor (yes, and the plumber, and the electrician, and the roofer - the list goes on and on). I don't think you would regret this much, especially in today's market - you may be ecstatic and think you've just coaxed the poor desperate seller and made a steal, but tomorrow will come and you will see that you're already upside down with all the problems you've overlooked.

But let's take a step back and read the complaints above. All of them share one property: they are obvious. All you need to do is pay attention.

There are certain things you can do in order to make those those problems more obvious.
  • The most difficult - look for a new house during most unfavorable season. I know, it is difficult, and plans may not work this way, and it would be difficult to have extreme conditions for the heater in the middle of the summer, but at least try. According to 6 years of observations, for Arizona (actually, North Valley, but it may be good enough for all of South Arizona) the coldest period appears to be a second half of January, extending into first half of February. Hottest period is usually the second half of July - immediately followed by the humid period (one thing I can say, though, is that if you have humidity problems in Arizona, out of all places, you'd better start walking away from that house before you finish reading this article).
  • Next best approximation is to schedule a visit during most unfavorable time of day. Hottest time of day, as far as cooling is concerned is around 5PM. Don't even hope to get the coldest time of day - unless you get to spend the night at the house, which, in this favorable to buyer market, may not be impossible.
  • Spend as much time at the house as you possibly can.
  • Make sure the doors stay closed during this time.
  • Open the curtains, don't take no for an answer.
  • Shut off the fans. Even if you like them and want them. Fans may mask the problem that already exists.
  • See where the thermostat setpoint is. Don't be cheap and spend $20-30 at RadioShack to buy a decent digital thermometer, say, 63-1087 or 63-1088 (disclaimer: I haven't tried those. The one I have is 63-1032, but it is wired).
  • Listen to the HVAC noise.
  • Run the hot shower for 15 minutes and see what happens to the walls afterwards. Hygrometer would probably be useless - sensor has too much inertia.
  • If you feel particularly adventurous, you may even want to shut off the HVAC for a while and then switch it back on and see how it behaves. Keep in mind, though, that if it brings the temperature back no normal within 15-20 minutes, you have a unit that is actually oversized (unless it is multistage, which is very rare).
And, again, start paying attention.