Sunday, October 14, 2007

The Great Wiring Project, part 1

The Great Wiring Project, part 2
The Great Wiring Project, part 3



Initially, it was just about tidying up power cables, interconnections and speaker wires for the home theater. For about 30 seconds. Then I realized that the cable path is right next to air supply vents, and the rest was pretty simple. In theory.

It is often said that wiring is difficult. Not really - but it is sure different from most of the jobs people do for living, so you have to acquire some experience before it becomes easy. "How to do wiring" is a topic beaten to death elsewhere, so I'll try to concentrate on things I have not seen mentioned during all those years I've been planning to do the wiring.

Now it is a good time to recall the saying "Good judgment comes from experience. Experience comes from bad judgment". Not that I've had a lot of bad judgment calls, but some of them were pretty close - and I hope you folks do learn on my mistakes .

The first observation is - forget all hopes to make it all elegant. You can only make things elegant with some planning and forethought, and when you start your own wiring (or any kind of remodeling that makes framing and existing wires exposed in any way) - you will promptly realize that forethought and planning is not something present in buildings mass produced to satisfy skyrocketing minute-driven demand for new housing when the interest rate plummets.

Second observation is - forget the code. You will not see the code followed anywhere where the building inspector could not peek into when the building is finished. Not that you won't be brought to responsibility when something bad happens to the stuff you built, so be thoroughly prepared to present evidence that you did it all by code - there are two standards, for "them" and for "you".

The Great Wiring Project, part 2
The Great Wiring Project, part 3

Saturday, October 13, 2007

I'm waking up, too

Those who have been following this project since days long gone may have noticed that nothing really significant appeared here in about last two years or so.

There were many reasons for it - I've changed the house (couldn't staple those nice looking blue cables to white walls any longer), changed the job (free time have become scarce), and all the things that could've been done to the project itself were essentially done - there was no significant itch to scratch anymore.

All of this changed again recently - energy prices are going up, kids are growing up, conditions change, and my last electric bill was whopping $420. Twice of what it was two years ago.

So the itch is there again.

And the last straw, I've made a mistake of undertaking a wiring project - and of course, as soon as I've opened the walls, I've realized that this is a perfect opportunity to install DZ again - and as soon as it is installed, two years worth of unimplemented ideas will start begging to be implemented and perfected.

So, the short term plan goes like this: Finish wiring, install sensors, install dampers, install DZ and roll on. Will not be fast (a simple speaker wiring project turned out into an exercise in advanced framing, insulation, conduit installation, drywalling, texturing and painting; plus, a new server room will be built to accommodate everything) - but it will be thorough.

Stay tuned.

Big guys are waking up

At last (seven years later), there are signs of companies that manufacture and install zoning systems and components for living waking up and paying attention to their Internet literate customers. First time ever, links from them (as opposed to mere installers) appear on the first page of Google search for related terms.

Eventually.

It appears, though, that they have to pay for listings to have them above DIY Zoning - which was the purpose of the project to begin with.

Let's see what the future holds.

Monday, October 8, 2007

Look, Ma, The Zone Control Blog!

Not this one. The one Jackson Systems created, here. Fresh one, too - started on September 24 2007.

Don't know about you, but I'm definitely looking forward to reading it. I sincerely hope it's not going to be an another clog.



Clog, n - a type of website where entries are made (such as in a journal or diary), displayed in a reverse chronological order. Clogs differ from Blogs because the content is typically aligned with a marketing or press release strategy in order to promote the company or corporation. -- Wikipedia entry on Clog

Thursday, October 4, 2007

The joys of DIY

I seem to be having extremely bad luck with contractors. It can easily be that I'm in a severe violation of the "secret of life is: have low expectations" principle. Most probable explanation, though, is that they just want to get their work day over with and go home. I guess they hope nobody would notice.

So my car breaks down (they do that). I get it to the dealership, they fix it... and put a dent in the door. I politely point out that the door needs to be fixed, they politely agree, fix the dent... and break the center console. And blame it on the car wash guys (never mind that I have specifically asked not to wash the car - last time they did, it cost them (not me - it was still under warranty) $1572 and spare change to fix the headlights the "car wash guys" killed).

It is plausible to assume that whoever dented the door hoped nobody would notice. It is also plausible to assume that whoever broke the console hoped nobody would notice. They just didn't expect that to happen twice to the same person in a row.

Fine... When in two weeks my window regulator breaks down and the window gets stuck halfway down, I take my sweet time to fix it, and my sweet money to buy the tools necessary (never before in my life I had a need for a torx bit set and a torque wrench - have them now). Spent a week, but next time it'll be an hour - procedures learned, tools acquired.

Oh, and I've also fixed all the things that the guys at the dealership broke the first time the window regulator broke, a couple of years ago. Half of pistons holding the door panel were broken. The door was rattling all this time, I've never had time to address the problem in depth, told dealership, they said "they all do that with age". Right. Few pistons fifty cents each - I bet they have buckets of those at each corner of the shop in abundance. But no, they didn't care to replace the ones they broke. A guy I met today explained to me: auto mechanics get paid by the job, not by the hour. They'd rather get paid for two jobs - and then two again, next time when the complaint is handled.

So, I've eventually gotten myself to route the wires through the walls. So I cut the walls open, and what do I see? Correct, 120V NM cable bundled together with telephone cable and stapled to the studs with metal staples. Forget the building codes, who is going to rip the drywall open to check it? Next thing I see is a 120V NM cable suspended across 20ft gap... with plastic conduit tube simply hanging on it. Not connected to anything. Next thing I see is a web of telephone wires, just knotted together and suspended in the middle of the attic.

I'm not even talking about a 1 ft diameter flex tubing branch crammed in snaking between framing members so its length is almost twice the distance it has to cover, and eventually feeding a 6x6 inch register.

I guess they hoped nobody would notice.

So what recourse do I have? None, really. Except you do have to take your time and energy to study all the sources on the subject matter and know what you're talking about when you're talking to contractors (but then they get pissed at you and might eventually tell you "you're too #%So what recurse do I have? None, really. Except you do have to take your time and energy to study all the sources on the subject matter and know what you're talking about when you're talking to contractors (but then they get pissed at you and might eventually tell you "you're too #%$&ng smart, I'm not gonna do business with you"), or simply learn to do it yourself.
amp;ng smart, I'm not gonna do business with you"), or simply learn to do it yourself.

Yes, the price I've paid for the tools to fix that car window would've paid for the labor. ONCE. Yes, I've already invested over three hundred dollars in tools necessary to do wiring (quality fish tape, drill bits, drill with enough torque to handle inch and a quarter holes, cables, connectors, wall plates, and so on and so forth), but I'm perfectly sure that at the end of the day, I'll be proud of the work I've done, and will have learned something to top it up.

Not all DIY is about saving a buck. Sometimes, it's about the long standing quality and the satisfaction of a job well done.